• Reduce top-up solvent consumption• Improve print quality• Lessen shop floor odour• Safer and healthier work area The conceptOn a rotogravure or a flexo press, let us assume that the ready-to-use ink temperature is 25°C and the viscosity is set to 19 (B4) cup seconds. As the printing progresses, theRead More …
IFLEX ideal press to print short to long runs of self- adhesive labels with the certainly of the best high quality output reached through simple operation and no risk. I FLEX with Chill Rollers, cool down the substrates for perfect printing results even on filmic materials. Converting sectionRead More …
Check the blade holder for any damages and make sire holder is clean inside Set the blade straight in holder. Check so there is no waviness in blade. When bolts/screws are used for tightening from center and out crosswise. Use as low blade pressure as possible
The top of the 45 back-up blade cut must not reach the end-point of the cylinder when the doctor blade oscillates It should stop approximately 10 mm from the cylinder end. Only the doctor blade should pass over this area
